Pulse Counter, 8 Channel

This is a smart, cost effective way to monitor multiple pulse counts from pre-existing water, gas and electricity meters. 
  • x8 cheaper than buying individual pulse meters
  • saves installation time
  • less wiring required
  • works with most gas, water and electricty meters
  • compatible with Light Pulse Detector 
Order Codes: BBSP-PM8
DATASHEET
The Enistic 8 Channel Pulse Counter is a cost effective way to monitor multiple pulse counts from pre-existing water meters, gas meters and electricity meters and is styled in a DIN mount case.
  • Low power 5V available
  • LCD and pushbutton to show measured values
  • Wide voltage supply range of 110-240VAC
  • Wireless operation
  • Encrypted communications for secure operation
  • Mesh networking for excellent range

Application & Features

This high accuracy meter is suitable suitable for connection to pre-existing meters such as gas, water or electricity as well as counting LED pulses and frequency via BBSP-LPD Light Pulse Detectors. 
  • 8 Channels reduce overall system cost
  • Interfaces seamlessly with the Enistic Light Pulse Detector (BBSP-LPD)
  • High accuracy design
  • Robust inputs with short circuit protection
  • Detects make/break and open collector pulses

Specification

Metrology
  • Channels: 8 
  • Pulse detection method: Make / break and Open Collector
  • Power: Power feed to detection circuits 5 V
  • Max supply currect to detection circuit: 20 mA
  • Pulse width (min / typ / max): 20 / 50 / 120,000 mS
  • Frequency of pulses (min / typ / max): 0 / 0.5 / 100 Hz
  • Ib: 10A
  • Maximum number of BBSP-LPD (optional): 8
  • Nominal reporting interval (kWh): 10 seconds
  • Nominal reporting interval (all channels): 80 s
Wireless Communications
  • Standard: 802.15.4 / Zigbee Pro
  • Does not interfere with WiFi networks
  • Frequency: 2.4 GHz
  • Maximum range between mesh nodes: 32m
  • Maximum nodes per network: >1,000,000
  • Encryption: 128 bit AES
Physical
  • Size (l x w x h): 90 x 72 x 62 mm
  • Fitting: DIN rail mount
  • Weight: 150g
  • Storage (min to max): -20 to 50°C, 0 to 60% relative humidity
  • Operation (min to max): 0 to 75°C, 0 to 60% relative humidity
Electrical
  • Power supply: 110-240 VAC, 50-60 Hz
  • Power consumption (typical / max): 0.1/0.15 W
Miscellaneous and Standards
  • Standards: CE, EMF, LVD, WEE, ROHS
  • Country of design and manufacture: UK
  • Packaging: cardboard box